The Amaprop 42-2500 /164 ZRG 10 kW is a submersible mixer for biogas plants. As a conventional low-speed agitator with high thrust, it ensures efficient flows with low energy consumption. A solid classic from the KSB brand.
Information on the agitator
Technical data
Drive Technical data
Special versions on request
- Used submersible mixer
- refurbished - technically overhauled
- 6 months warranty
- Slow runner
- with Ø 2500mm propeller Glass fiber reinforced plastic (GRP)
- Explosion protection to II 2 G Ex dc IIB T3
- Simple assembly
- Can be used as a single or supplementary agitator, floating layer destroyer and flow accelerator
- for pre-pits, fermenters, slurry tanks, secondary fermenters, fermentation residue storage in biogas plants
- Holder for 100x100mm square tube
- Connection cable 20 m
- Sliding holder / holder for other square tube sizes - available on request
- Installation and commissioning on your own responsibility or by a WHG-certified specialist company - enquire now
- Manufacturer: KSB Aktiengesellschaft
- Type/Designation: KSB Amaprop 42-2500/164 ZRG
- Design: fully submersible mixer; for horizontal installation
- Explosion protection: yes (complete unit); ATEX "II 2 G IIB T3"; ATEX II2G (for zone 1 and 2)
- Drive: Electric motor; Gearbox
- Shaft seal: 2 GLRD in tandem arrangement with oil seal
- Medium temperature: up to max. 60°C; temperature class T3 (aggregate)
- Propeller: 2 blades
- Propeller type: Self-cleaning ECB propeller
- Propeller material: Glass fiber reinforced plastic (GRP)
- Propeller Ø: Ø 2500 mm Propeller
- Propeller speed n2: up to 42 rpm
- Axial thrust: 4600 N (according to EN ISO 21630)
- Power P1: 5.43 kW (based on pure water)
- Dimensions: L/W/H 1530 mm x 2500 mm + 2500 mm (with propeller & glide mount)
- Weight: 276 kg (including propeller)
- Scope of delivery: function-tested submersible motor agitator (drive, propeller, suspension element, 20 m electrical connection cable supplied); sliding holder / mount; gearbox; fasteners for propeller (screw, washer, screw lock)
- Drive type: Electric motor (three-phase asynchronous motor with squirrel-cage rotor)
- Motor manufacturer: KSB
- Engine designation: Amagear 164 ZRG
- Motor protection class: IP 68
- Explosion protection (motor): II 2 G Ex dc IIB T3
- Type of protection: Exd IIB
- Fu operation approved: yes (according to motor manufacturer)
- Motor power P2 max: 10 kW
- Engine speed: 1400 rpm
- Rated motor current: 22,7 A
- Number of poles: 4
- Rated voltage: 400 V
- Frequency: 50 Hz
- Switch-on mode: Direct/star-delta possible
- Connection type: Delta connection
- Connection cable: 20 m; cable entry potted longitudinally watertight
- Motor moisture protection sensor: without leakage sensor
- Temperature protection sensor: PTC resistor
- Connection cable > 20 m
- Evaluation device for leakage sensor, thermistor triggering device for winding monitoring
- Special voltage 500 V and 690 V
- Special cables
- Special installation parts
- Mechanical seal with covered spring
- Special coating 2-component epoxy resin 250 μm
- Additional operating instructions
- Customized installation drawing
- Flow simulation
- Installation advice
PRODUCTS
Current agitator offers
CONTACT
Inquiry form
Please fill out the form and we will get back to you within 48 hours.